Please confirm your age to continue. I hereby confirm that I am at least 18 years old.
The SQuape A[rise] 22mm MTL

With 10 years of experience back to the roots.

The SQuape A[rise] 22mm MTL is the small version of the well-known SQuape A[rise] 24mm from 2020. Its specialty lies exclusively in the MTL range.

StattQualm has always made usability, safety, quality, and flavor a top priority. If you want an RTA that works reliably, is leak-proof (even in extreme conditions) and offers an excellent taste experience, then the SQuape A[rise] 22mm MTL will give you a lot of enjoyment.

The included Air Nozzle Kit (stainless steel 0.8/1.0/1.5/2.0mm) allows easy conversion with four differen

With 10 years of experience back to the roots.

The SQuape A[rise] 22mm MTL is the small version of the well-known SQuape A[rise] 24mm from 2020. Its specialty lies exclusively in the MTL range.

StattQualm has always made usability, safety, quality, and flavor a top priority. If you want an RTA that works reliably, is leak-proof (even in extreme conditions) and offers an excellent taste experience, then the SQuape A[rise] 22mm MTL will give you a lot of enjoyment.

The included Air Nozzle Kit (stainless steel 0.8/1.0/1.5/2.0mm) allows easy conversion with four differen

With 10 years of experience back to the roots.

The SQuape A[rise] 22mm MTL is the small version of the well-known SQuape A[rise] 24mm from 2020. Its specialty lies exclusively in the MTL range.

StattQualm has always made usability, safety, quality, and flavor a top priority. If you want an RTA that works reliably, is leak-proof (even in extreme conditions) and offers an excellent taste experience, then the SQuape A[rise] 22mm MTL will give you a lot of enjoyment.

The included Air Nozzle Kit (stainless steel 0.8/1.0/1.5/2.0mm) allows easy conversion with four different air settings. Additional air nozzles (1.2/1.8/2.5mm) will be available upon release. The atomizer can also be used entirely without air nozzles.

From our ten years of experience, the SQuape A[rise] 22mm MTL has the following advantages to offer: clever power management, non-conductive surface structure of the complete atomiser chamber made of ematalised aluminum, haptically easy closing of the tank by a simple twist and generous filling holes. Due to the self-contained system, the tank can be transported separately from the base even when filled.

 

Worldwide release: 31st August 2022

RRP: CHF 179.00 / EUR 189.00

With 10 years of experience back to the roots.

The SQuape A[rise] 22mm MTL is the small version of the well-known SQuape A[rise] 24mm from 2020. Its specialty lies exclusively in the MTL range.

StattQualm has always made usability, safety, quality, and flavor a top priority. If you want an RTA that works reliably, is leak-proof (even in extreme conditions) and offers an excellent taste experience, then the SQuape A[rise] 22mm MTL will give you a lot of enjoyment.

The included Air Nozzle Kit (stainless steel 0.8/1.0/1.5/2.0mm) allows easy conversion with four different air settings. Additional air nozzles (1.2/1.8/2.5mm) will be available upon release. The atomizer can also be used entirely without air nozzles.

From our ten years of experience, the SQuape A[rise] 22mm MTL has the following advantages to offer: clever power management, non-conductive surface structure of the complete atomiser chamber made of ematalised aluminum, haptically easy closing of the tank by a simple twist and generous filling holes. Due to the self-contained system, the tank can be transported separately from the base even when filled.

 

Worldwide release: 31st August 2022

RRP: CHF 179.00 / EUR 189.00

36 mm
Height
22 mm
Diameter
Single Coil
Coiling
MTL and tight RDL
Airflow
Features
  • elegant and clean design
  • easy filling by turning the top cap (TopFilling)
  • stepless air and liquid flow control by turning the tank
  • single coil operation
  • adjustable 510 connector (gold-plated)
  • deck is accessible even with full tank
  • lockable and leak-proof tank
  • non-conductive components inside to avoid short circuits
  • user-friendly handling and coiling options
  • exchangeable window
  • temp. control and volt/watt suitable
  • easy switching between the three positions; „remove“, „vape“ (with air flow control) and „closed“ by turning the tank.
  • 100% Made in Switzerland


Worldwide release on August 31st 2022

 

RRP: CHF 179.00 / EUR 189.00

 

Please note: the base of the SQuape A[rise] 22mm MTL cannot be disassembled except for the center pin, the two screws and the o-rings. The closing ring is included separately and must be installed beforehand. See manual.

  • Diameter: 22 mm
  • Height (without SQuip Tip and 510 connector): 36 mm
  • Weight: 45g
  • Connector: 510
  • Tank capacity: ~2.5ml (5ml with accessories)

  • Stainless steel components: Steelnumber 1.4404 / 316L
  • Window: PSU (Polysulfon)
  • Deck, Chimney and Closing Ring: Aluminum ematalised, anodised
  • Centerpin: Ecobrass gold-plated
  • Mouthpiece: Stainless steel/ POM
  • O-rings: nbr 70 shore shore

FAQ
  • Are other accessories available?
  • We are constantly expanding the range of accessories for the SQuape A[rise] 22mm MTL. Especially for the Air Nozzles we strive for a comprehensive range. Further tanks and designs are also being considered. All current and future accessories can be found in our shop.

     

  • How often do I have to clean the SQuape A[rise] 22mm MTL?
  • It is necessary to unscrew the centre pin from time to time and wipe it with a cloth. We recommend cleaning the SQuape A[rise] 22mm MTL occasionally with running water or ultrasonic bath. Never clean it with a dishwasher. Let it dry well after cleaning.

     

  • My Top Cap ring turns too heavy / too light
  • You can remove the Top Cap ring and replace the O-ring underneath with one from the replacement set. O-rings have different tolerances and can therefore influence the resistance of the rotation.

     

  • How to remove the closing ring?
  • Remove the tank unit with the supplied hex key. Then take a sufficiently large pen and insert it from above into the hole in the closing ring. Then simply push the closing ring down.

  • My PSU or Quartz-Glass is defective or broken. What can I do?
  • All PSU tank sections can be bought as replacements in our shop.
    Material: PSU
    PSU (polysulfone) is very durable and is used in medicine, biotechnology and food preparation. PSU is much more resistant to tank cracker liquids than e.g. PMMA. However, even this material is not completely resistant to all flavours. StattQualm is not liable for tanks damaged by liquids and flavours. We generally recommend cleaning the tanks with cool water if necessary.

  • I get a short circuit - why?
  • You might have pushed your coil to close to your air nozzle. Lift the coil a little bit.

  • The locking mechanism is very heavy.
  • Please proceed as follows:
    Remove the Closing Ring to check if a foreign object is jammed. Please also check if the O-ring inside the chamber is ok. Then place the with VG lubricated Closing Ring on the deck again and place it into the atomizer. Make sure that the tank is pressed down completely.

    If this does not help, please note the following:

    With the SQuape A[rise] 22mm MTL the tolerances are kept very small, so it is imperative that the O-rings and the Closing Ring are well lubricated with VG.

    This concerns especially the following O-rings:
    - Base (this is located between pins and the deck around the base)
    - Both smaller O-rings, which rest on the deck
    - O-ring inside the chamber. The O-ring encloses the Closing Ring as soon as it is inserted.

    The O-rings need a few turns until they are settled in. You can use the SQ Grip Band to move the tank back and forth a few times. After that the mechanism should be very smooth. If there is no improvement even after moving the tank back and forth several times, we recommend to replace the O-rings in the following order with a replacement O-ring from the replacement set:
    1. o-ring on the base
    2. o-ring at closing ring
    3. o-rings on the deck

    In between, try again and again to see if the situation has improved. Unfortunately O-rings have a higher tolerance but there is a possibility that the replacement set contains an O-ring which fits perfectly.

    If the mechanism does not improve after this procedure, we recommend that you send us the device and we will take a thorough look at the problem. If there is a fault in the assembly or production, we will of course replace the unit free of charge. Please use the document "LINK", which you should fill in and send back to us together with the atomizer. We will then take care of the patient immediately.

  • No contact with the mod.
  • Unscrew the centre pin a little. If this does not help, contact support@squape.ch.

     

  • My SQuape A[rise] 22mm MTL gurgles or leaks.
  • - In case of a slight gurgling and when using the chimney air reducer, check if chimney air reducer closes to your mouthpiece
    - Have you installed the closing ring?
    - Is the top cap ring completely closed so that the o-rings are no longer visible near the liquid feed holes?
    - Is your air nozzle placed correctly? Tipp: lubricate the o-ring at the air nozzle before installing it.
    - Is there a defect in the tank section?
    - Are all o-rings still in order?
    - Are the pockets in the deck fluffed with cotton?
    - Is it time to change the coil and cotton because the cotton has become oversaturated with time?
    - Do you fill the SQuape A[rise] 22mm MTL only in "closed" and "remove" mode?

    - Disassemble the SQuape A[rise] 22mm MTL once completely, clean it and reassemble it.
    - If everything is in order and in place, please send us a picture of your coil with a note of your problem

  • My SQuape A[rise] has a burning taste / or I get dry hits.
  • - Open the Liquidcontrol clockwise (see manual).
    - Is there still enough liquid in the tank?
    - Reduce the amount of cotton.
    - Do not stuff the cotton into the pockets, just place it in the tank.

    - change the coil and cotton.

  • I get little taste or throathit (flash).
  • - If you can't get enough flavour out of the SQuape A[rise] 22mm MTL, then place the coil a little deeper into the deck. If necessary take a coil that has been turned clockwise. Make sure that the coil does not touch the air nozzle and that there is a distance between the coil and the air nozzle despite the lowering.
    - You may use too much or too little cotton and the liquid will not reach the coil sufficiently.
    - We assure you that the SQuape A[rise] 22mm MTL produces excellent taste. Therefore try changing the amount of cotton and the position of the coil.
    - If you have a Facebook account, we recommend the SQuape Official Group. There you will find many tips regarding various setups from users of the SQuape A[rise] 22mm MTL.

    - Do you want more or less throathit (flash)? Lift the coil a little bit, creates a more intense throathit.

  • Where can I get more information and tips?
  • Facebook-Group: https://www.facebook.com/groups/squape.stattqualm.official

    e-mail support@squape.ch.

    YouTube: https://www.youtube.com/user/StattQualm/playlists

  • How do I remove the tank section?
  • Please make sure that you open the chimney correctly with the enclosed hex key:

    Insert the hex key from below into the chimney. Hold the tank with the SQ Grip Band upside down in your hand and look at the chimney from below. Then turn the hex key clockwise. If you are looking at the tank from above (looking at the filling holes and the A[rise] logo), turn the hex key counterclockwise.